These are 5 of the most effective bets to make on craps to win. By reducing the house odds you are increasing your own chances of winning big when the table is hot. Try this for yourself at Slots of Vegas Craps Table today and walk away a winner! See also: 'Fall in love with the game of craps'. The craps table always draws a crowd at the casino, perhaps because there's usually so much whooping and hollering coming from the players. If you'd love to build your own craps table to spruce up your rec room or den, you're in luck. Once you know how to build a craps table, you'll discover that.
Here is a fun set of links by a guy who built his own table (6 ft.) from scratch following some plans he bought on ebay. It actually looks really cool.
It actually looks really cool.
Unless I miss my guess, the poster interested in constructing his own craps table is not interested in the look of the end product but in its bounce characteristics. I would consider this a great waste of time and effort and therefore I hope I am wrong and that the poster merely wants a nice looking craps table for his home.Constructing a dice table, particularly one with a layout and felting for a particular casino is a foolish waste of time and money if it is done for any sort of dice control experimentation.
If working with wood is your hobby and you simply want a pleasant object in your basement recreation room, fine. If you think that experimenting in your basement with tossing dice is going to make you rich, spend the time and money on something that is more sensible.
Does anyone know where to buy plans to build a professional 12ft. Craps table. Do not need a kit, just a the plans/blueprints please email me at clyffcarlock at yahoo dot com. Thank you.
All you needed to do was send a PM to mkl654321.
All you needed to do was send a PM to mkl654321.
You really are a tiresome bore, Logan. We get it, you don't like MKL. Great, now stop polluting every thread with your mancrush on hating him, okay? It's like listening to a four year old whine that someone ate his last goldfish cracker.
You really are a tiresome bore, Logan. We get it, you don't like MKL. Great, now stop polluting every thread with your mancrush on hating him, okay? It's like listening to a four year old whine that someone ate his last goldfish cracker.
How To Build A Craps Table At Home
I didn't say anything about hating him. Where'd you get that? I like to ride him into know-it-all country, and that's entertainment!BTW, here it looks like the pollution is coming from the cesspit. You could have just skipped over it. Now the clown will see what I posted because he has me on block.
I didn't say anything about hating him. Where'd you get that? I like to ride him into know-it-all country, and that's entertainment!
BTW, here it looks like the pollution is coming from the cesspit. You could have just skipped over it. Now the clown will see what I posted because he has me on block.
So, if you know he has you on block, why bother to contaminate this thread, and as pointed out, every other thread to boot ?
You've made your point, now please give it a rest so the rest of us can enjoy the forum as we used to 6 months ago.
http://www.dicesetter.com/setting/build_craps_table.htm
There's possibly enough there to get a start on though..
(JeeryLogan will now procede to fail to keep on some sort of topic, fail to follow his own advice and wave his sippy cup around whining about the lack of juice in it).
So, if you know he has you on block, why bother to contaminate this thread, and as pointed out, every other thread to boot ?
You've made your point, now please give it a rest so the rest of us can enjoy the forum as we used to 6 months ago.
That doesn't make any sense. And going by your own definition, you're just as much the contaminate as I am. Why can't you just leave it alone and it'll go away.
How To Build Your Own Practice Table
New & Improved
Upgraded Practice Table With Shooting Station
Looking for Dice Layouts, Chip Rail and Corners for your table find them here.
Before you start your pactice table, maybe refresh your knowlege of the game with Free Craps Lessons?
Practice Table Construction (updated 05/30/02)
Materials: (total cost about $200)
| Birch Plywood | home supply store | 1 | 3/4' | 4' | 8' |
| Birch Plywood | home supply store | 1 | 1/2' | 3' | 5' |
| Plexiglass | home supply store | 1 | 1/8' | 2' | 48' |
| Flat Head Wood Screws | home supply store | 20 | #10 | 1 3/4' | |
| Round Head Wood Screws | home supply store | 2 | #6 | 1' | |
| Wood Glue | home supply store | 1 | 8 oz. | ||
| Household Adhesive (for rubber) | home supply store | 1 | 4 oz. | ||
| 75% wool 25% nylon billiard felt or craps Layout | www.bestbilliard.com or http://www.casino4you.com/ | 1.5 Yards | |||
| Flannel | http://www.casino4you.com/ | 1 Yard | |||
| Diamond dice rubber | http://www.casino4you.com/ | 1 | 9 1/2' | 48' | |
| Banquet table legs | www.woodworker.com # 802-086 | 1 Pair | |||
| Waxed paper |
Tools:
| Handheld Circular Saw (Radial arm saw optional but makes it easy) |
| Handheld Jig Saw |
| Drill |
| Tubing cutter or hack saw |
| Router (optional) |
General Info
New casino resort in nassau bahamas. The sides and bottom base of the practice table are made from one sheet of 4'x8' 1/2' plywood. It can be any type of any plywood, but birch or oak will make a better looking table and will dice will not dent as easily. The top rail of 1/2' plywood adds strength and helps maintain shape and it can be upholstered if desired. It is important to make the table solid. Making the bottom base a single layer reduces cost but compromises authenticity.
By purchasing the plywood at a Home Depot or Lowe's they will make some of the cuts for you. Two cuts are free. Have the sheet split lengthwise with one side 24' wide. Split the 24' wide strip in two pieces giving 2 - 24'x47 15/16' pieces (you lose 1/8' for saw blade). Depending on size requirements the bottom base could be trimmed to 47 1/2' as shown in the drawing or left at 47 15/16' width. The other piece would be ripped lengthwise twice to make a 9 1/2' x 96' piece and an 11' x 96' piece.
Bottom Base
Attach the two 24'x47� ' pieces together using six to eight 1�' #10 flathead wood screws from the bottom side only. Be sure that the screw heads are flush. Layout the 14�' radius corners and cut with a hand held jig (saber) saw. A router can be used to smooth the edges with a 3/8' round over bit top and bottom. The routing is not essential but it makes the felting easier. Do not cover base with felt until the sides are constructed. When covering with felt an under layer of flannel (purchased from a fabric store) reduces the hardness and makes the surface more like casino conditions.
The banquet table legs are 28' in length. Cut 3' to 3�' off the bottom using a tubing cutter of hack saw. Mount the legs, with the screws provided, to the base about 6' in from the edge. Make sure that the smooth surface (no screw heads) of the base is up.
Side Boards
Cutting of the kerfs, which allow the side board to bend around the corner, is accomplished by setting the saw to a depth of 1/16' less than the thickness of the plywood. Try a couple of test cuts on some scrap or the ends to make sure the cut does not go completely through the plywood . If the depth becomes equal or greater than the thickness of the plywood it will ruin the project. Layout the kerf lines 1' apart (�' or 3/4' makes a smoother turn but is a lot more work). Use a straight edge guide to cut the kerfs with a hand circular saw or a radial arm saw. The radial arm saw, if you have one, makes the job much easier. Make sure that there is a rigid board under the entire length of the side board when cutting as the side board will break at the kerfs if there is no support. The ends should not be cut to length until the board is wrapped on the bottom base and marked and cut.
There are two side boards. The outside side plywood is wrapped around the bottom base with the kerfs facing inward towards the bottom base and with the edge of the outside side flush with the underside of the base. Placing waxed paper around the edge and on top of the base will keep glue in its place. Wetting the smooth surface of the plywood with a spray bottle, where the kerfs have been cut, helps bending. Clamps or temporary nails hold the outside side plywood in place against the base. Do not drive nails all the way in as they will be removed when the inside side board is glued into position.
Apply wood glue to inside surface (kerf side)of the outer side. Carefully bend the inside plywood side (kerf of inside plywood facing the kerf of the outside plywood) into position. Clamp or screw using 1�' #10 screws, the inside plywood to the outside plywood (from the inside). Allow adequate time to dry.
The excess sides may now be trimmed with a saw even with the bottom base.
An optional 2' high plexiglass fence added to the front of the table will keep the dice confined to the practice table. I have found it keeps the dice from bouncing off the table when your friends toss the dice. A precision shooter would never make a shot with that much rebound. The plexiglass starts just above the base. Drill holes in plexiglass and attach with 2 1' #6 round head screws.
Top Rail
Cut out the top rail from the �' plywood using a jigsaw. Align on top of the sides and attach using 1�' #10 screws. You can upholster the top rail with 1' foam and vinyl if desired.
Chip rails can be purchased at http://www.casino4you.com/
Felt
Place the flannel on the base (make sure screw heads are on the underside) and staple. Apply the felt over the flannel and attach using a stapler. Start with the straight edge and stretch and staple.
Diamond Rubber
Attach the rubber centered between the curved portions. Use a rubber adhesive as it is a silicone flexible adhesive that will not become brittle.
How To Build A Craps Table At Home
Shooting Station for Practice Table Construction
| Birch Plywood | home supply store | 1 | 3/4' | 4' | 8' |
| Birch Plywood | use extra from practice table | 1 | 1/2' | 4' | 8' |
| Flat Head Wood Screws | home supply store | 20 | #10 | 1 1/4' | |
| Flat Head Wood Screws | home supply store | 5 | #10 | 2' | |
| 75% wool 25% nylon billard felt | use extra from practice table | 1.5 Yards | |||
| Foam For Padding | Fabric Store | 1 | 1' | 8' | 36' |
| Vinyl Upholstery Fabric | Fabric Store | 1 | 12' | 48' | |
| Banquet table legs | www.woodworker.com # 802-086 | 1 Pair |
Tools:
| Handheld Circular Saw |
| Handheld Jig Saw |
| Drill |
| Router (optional) |
The sides and bottom base of the shooting stand table are made from one sheet of 4'x8' 3/4' plywood. The top rail of �' plywood is for the rail padding we lean against so much. Optional chip trays are shown but not described. Email me for details on the chip tray if you want to go to this detail.
By purchasing the plywood at a Home Depot or Lowe's they will make some of the cuts for you. Two cuts are free. The cutting diagram will help.
Station Bottom Base
Attach the two 24'x36' pieces together using 1�' #10 flathead wood screws from the bottom side only. Be sure that the screw heads are flush to avoid marring any surface you set the table up on. A router can be used to do a 3/8' round over on the top and bottom. Cut 3' to 3�' from each leg of the banquet table legs using a tubing cutter (a hacksaw will work but is a lot more work and the result is not as smooth).
Next attach the banquet table legs. Place them about 6' from the ends of the base and attach with screws provided with the legs.
The base must be covered with felt prior to installing the side. Stretch and staple to the station base.
Side Boards
Sandwich the �' x 36' (9� ' and 11' high) side boards and use 1�' #10 flathead wood screws from the 9�' side to secure the two pieces. Be sure that the screw heads are flush.
Place the sandwiched plywood side board on the felted base and attach with 3 2' #10 wood screws.
Attach the �' plywood, 6�' wide top cap to the side boards using 1�' #10 wood screws. You may add chip rails if you desire. Chip rails are made out of 1' thick mahogany. It takes some woodworking skill to make the chip rails.
The �' x �' x 38' piece must be glued to the �' x 3�' x 38' plywood before the corners are rounded. After this step apply 1' foam over the top and front of the plywood. Staple the vinyl upholstery fabric to the rail for a casino like rail rest.
Happy Shooting
DiceSetter.com
Practice Table on Banquet Table Legs | Practice Shooting Station |
Kerf detail
Quick and Dirty Practice Table Casino theme party dress code.
Supplies:
14' x 5' Sheet of 1/2 inch plywood or particle board
12' x 3' Sheet of masonite
172' x 48' sheet of felt
1Twin size foam mattress pad (twin size)
1Can of spray paint
1Can of spray adhesive
Tools:Circular saw
Drill
Hammer
Staple Gun
Time:
Approximately 2 hours.If you spray paint the mattress pad, perhaps do this step the evening before.
Cost:
If you don't have to buy power tools, this will cost around $29.
Construction:
- Cut foam mattress pad into a 12' x 6 ‘ length.Spray paint to desired color (optional)
- Cut plywood to be 4 feet wide by 3 feet deep for base.
- With left over plywood, cut another piece of plywood 4' long by 12.5' high for the back wall.
- Cut 2 masonite sheets 15' long by 12.5' high for side walls
- Drape felt over plywood.Cut to size such that there is about 2' extra around the perimeter of the plywood.Staple felt to the edges of plywood, keeping it taught.
- Screw back wall to the base
- Screw side wall masonite pieces to the base.Make sure that they overlap to the back wall plywood. Screw masonite side pieces to back wall as well.
- Place mattress pad on the table, inside the 3 walls.You will be able to make curved corners.Once you have the fit that you like, spray adhesive on the inside of the back and side wall pieces AND on the back of the mattress pad.Secure into place.Let dry.
Options: You can purchase REAL craps table felt with all the markings and REAL back wall pyramid rubber from http://www.gamblersgeneralstore.com .It will significantly increase the cost of building the table.
Here's the practice table Ray built. A beautiful piece of work!
(under construction)
(finished practice table)
Here is a picture of the practice table Big Lou constructed!
